A stop molding for doors is a thin rail located on the edge of the door panel and tightly attached to the door frame when closing it. Without such a bar, when the doors are closed, there is a gap through which extraneous sounds and drafts penetrate the room. The rail provides a tight connection of the panel with the frame. There are different types of stop moldings for doors: simple, multi-level, flat, angular. Some versions are equipped with a regulator, with the help of which a tight connection of the panel with the frame is ensured. Remember that due to the complexity of manufacturing the cost of such a door is higher than normal.

 


 

How Do Doors with Stop Moldings Protect Your Peace and Health?

The molding eliminates the problem of chinks and gaps between the panel and the frame when the door is closed. Even the simplest model provides the following benefits.

  • Improved sound isolation. The door structure is pressed closer to the frame, which creates an obstacle for sound waves. This is especially important for interior doors of the bedroom or office.

  •   Draft and dust protection. We recommend you to buy a stop molding if the room is well ventilated - in this case, small debris will not fly inside.

  •   Improving the appearance of the structure. Gaps and chinks look ugly – the rail hides them.

 

Features of Installation of Doors with Stop Moldings

The door with such a rail is equipped with a profile strapping. Trims are used to hide the irregularities of the walls. The door panel is mounted on two or three side hinges. You can use the left and right panel (you just need to place the hinges in a suitable place).

Having decided to buy a stop molding, note that installing a door with it is slightly different from installing a conventional design. Special hinges will need to be screwed into the rack, the thread of which must be fully located in the body of the frame (subsequent adjustment of these components is possible).

When mounting the hinge strips are screwed into the door panel. After that, you need to combine the hinges on the rack and the panel, and also to check whether the structure opens and closes normally. To control the size of the gaps, it is enough to twist or unscrew the hinges.

Important information! If a door closer is installed on the door and the rail has an angular shape, the mechanism should be adjusted so that in the final stage of closing the door's stroke slows down considerably. If you do not pay attention to this, the stop molding for doors can be damaged by a sharp blow.

 

Choosing the Right Hinges

Not all hinges fit to these doors. Pay attention to the following options.

  • Card angle hinges. They are fixed according to the same principle as the standard straight hinges, but they have an angular shape. The mounting plate is bent 90 degrees.
  • Screwed hinges. Connected to the door frame and the door, made of brass or stainless steel.

  • Hidden hinges. The main component of such a hinge is a hinge joint in a metal case. If the door is closed, the hinge is not noticeable. Installation requires the use of special tools.

 

Order Stop Moldings in ISTOKDOORS!

Buy a stop molding at an affordable price by contacting our company! Options of the different sizes, with a photo and the description of characteristics are available. Make an order!